Product ID:CARBON DIOXIDE,FIRE EXTINGUISHER SYSTEM PRE
MSDS Date:10/28/1988
FSC:4210
NIIN:00-270-4512
MSDS Number: BRDJF

Emergency Phone: 216-526-9900/FAX 216-838-5137

Info Phone: 216-526-9900/FAX 216-838-5137

Cage: 04826

Telephone: 216-946-9000

Cage: 34597

CARBON DIOXIDE

CAS: 124-38-9

RTECS: FF6400000

OSHA PEL 5000 PPM

ACGIH TLV: 5000PPM/30000STEL;93

LD50 LC50 Mixture:ORAL LD50 (RAT) IS UNKNOWN.
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MFR SAID "NOT APPLICABLE", AND
DESCRIBED THE PHYSICAL HAZARDS OF RUPTURE DUE TO OVER
PRESSURIZATION AND PROPELLSION ASSOCIATED WITH PRESSURIZED
CYLINDERS. HMIS:CARBON DIOXIDE MAY CONCENTRATE AND CAUS E
ASPHIXIATION IF RELEASED IN ENCLOSED PLACES.
Explanation of Carcinogenicity:THE PRODUCT CONTAINS NO INGREDIENT AT
0.1% OR GREATER THAT IS LISTED BY IARC, NTP OR OSHA AS A
CARCINOGEN.
Effects of Overexposure:MFR SAID "NOT APPLICABLE". HMIS:CARBON DIOXIDE
MAY CONCENTRATE AND CAUSE ASPHIXIATION IF RELEASED IN ENCLOSED
PLACES. SYMPTOMS ARE RAPID BREATHING, DIZZINESS, HEADACHE, LOSS OF
CONSCIOUSNESS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:MFR: "IN EVENT OF PHYSICAL INJURY, TAKE APPROPRIATE FIRST AID
OR MEDICAL MEASURES." HMIS:INHALED: REMOVE FROM EXPOSURE. RESTORE
BREATHING OR GIV OXYGEN AS NEEDED. GET MEDICAL ATTENTION.

Extinguishing Media:MFR SAID "NOT APPLICABLE" HMIS: USE MEDIA
APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:AVOID DIRECT HEAT AND SEVERE IMPACT TO
PRESSURIZED CYLINDERS.
Unusual Fire/Explosion Hazard:EXPOSURE TO FIRE/OVERHEATING CAN CAUSE
CARBON DIOXIDE CYLINDERS TO RUPTURE.

Spill Release Procedures:"REFER TO MSDS FOR CARBON DIOXIDE. CYLINDERS
SHOULD BE REFILLED ONLY BY TRAINED PERSONNEL." HMIS: EVACUATE AND
VENTILATE AREA.
Neutralizing Agent:NOT APPLICABLE.

Handling and Storage Precautions:HANDLE, TRANSPORT AND STORE CAREFULLY
AND SECURLY TO AVOID ACCIDENTAL KNOCKING OVER OR OTHER SEVERE
PHYSICAL IMPACTS. DO NOT EXPOSE TO DIRECT HEAT.
Other Precautions:DO NOT OVER PRESSURIZE. VALVE CAPS, SAFETY PLUGS
AND/OR PULL PINS SHOULD REMAIN ON CYLINDERS NOT CONNECTED FOR USE.

Respiratory Protection:NONE
Ventilation:MFR SAID "NOT APPLICABLE"
Protective Gloves:LEATHER GLOVES FOR HANDLING CYLINDERS
Eye Protection:EYE PROTECTION IS RECOMMENDED
Other Protective Equipment:SAFETY SHOES ARE RECOMMENDED FOR HANDLING
CYLINDERS.
Work Hygienic Practices:MFR:"NOT APPLICABLE" HMIS:USE GOOD INDUSTRIAL
HYGIENE PRACTICE. AVOID UNNECESSARY CONTACT.
Supplemental Safety and Health
KEY2:KT ASCOA SUPPLIED MSDS FOR CARBON DIOXIDE FROM CARDOX AND THE
ABOVE DOCUMENT FOR USE OF THEIR SYSTEM.

HCC:G3

Stability Indicator/Materials to Avoid:YES
"NOT APPLICABLE"
Stability Condition to Avoid:DIRECT HEAT AND SEVERE IMPACT TO
PRESSURIZED CYLINDERS
Hazardous Decomposition Products:SUPPLIER DIDN'T ADDRESS THIS FIELD.
Conditions to Avoid Polymerization:"NOT APPLICABLE"

Waste Disposal Methods:MFR SAID "NOT APPLICABLE" HMIS: DISPOSE I/A/W
FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.